Epson FX-2170 Manuale Utente

On page 1-15, add the information below.

Installing the driver for Windows 95 users

Follow these steps to install the printer driver using the
Windows 95 plug-and play capabilities:

Note:

To install the driver using the Windows 95 plug-and play

capabilities, your computer’s parallel port must be an IEEE-2284

(ECP or EPP compatible) bidirectional parallel port. See your

computer documentation for

information.

1. Make sure plain paper is loaded in the printer and the

printer is connected to the computer’s parallel port. (The

paper is used to perform a test print in step 11.)

2. Turn off your printer and computer, if necessary.

3. Turn on the printer first; then turn on the computer. Your

computer begins loading Windows 95.

4. If you defined a password, enter it at the prompt. You see

the New Hardware Found screen.

Note:

If you do not see the New Hardware Found screen, please follow

the procedure under “Installing the driver while

running

Windows 95,” the next section.

5. Make sure your printer model name is displayed on the

screen.

Then

click the

Driver from disk provided by

hardware manufacturer

button. Do not select any of the

other buttons.

Note:

The next time you turn on your computer after installing the

driver, Windows 95 may display the New Hardware Found

screen again. In this case, click the

Do not install a driver

radio button; then click

OK.

This screen does not appear again.