Epson 440 Manuale Utente
EPSON Stylus Color 600
Rev. A
1-6
1.2.3
Adjust Lever Settings (PG adjust lever)
The adjust lever located on the right side (blue knob) under the printer cover needs to be set to the
proper position according to the paper you print (Refer to the table below). Also, if there is any dirt
caused by friction on the wavy or wrinkled paper, this can be prevented by changing the lever position to
rear position (marked with “+”) in spite of paper types.
proper position according to the paper you print (Refer to the table below). Also, if there is any dirt
caused by friction on the wavy or wrinkled paper, this can be prevented by changing the lever position to
rear position (marked with “+”) in spite of paper types.
Paper
Lever position
PG adjustment value
Normal paper,
Coated paper
Transparency film
Label
Coated paper
Transparency film
Label
Front
0 mm (1.1mm between head and platen)
Envelopes
Rear
0.9 mm (2.0mm between head and platen)
Table 1-5. Adjust Lever Settings
Front (Mark "0")
Rear (Mark "
+")
CR Guide Shaft
Bush
Level adjustment lever
Figure 1-2. Adjust Lever Settings