Epson 440 Manuale Utente

EPSON Stylus Color 600

Rev. A

1-22

1.4.2 Panel

Functions

•q

Panel Functions

•r

Switch

Function

Load/Eject

(Pushing within 0.5 seconds*)

Loads or Eject the paper.

When the carriage is on the Ink Cartridge change position, return the
carriage from Ink Cartridge change position.

Load/Eject

(Pushing for 2 seconds*)

Starts the Ink Cartridge change sequence.**
Moves the carriage to cartridge change position.

Cleaning

(Pushing for 2 seconds*)

Starts the Head Cleaning sequence. ***

In the condition of “Ink Low” or “Ink Out” or “No Ink Cartridge” starts
the Ink Cartridge change sequence.**

Cleaning

(Pushing within 2 seconds*)

When carriage is on the Ink Cartridge change position, return carriage
from Ink Cartridge change position.

Note)

3 seconds is required at the User’s manual.

**: This function is not available in printing status.
***: The time to complete the sequence may vary depending on the printer’s status.

•q

Panel Functions with Power ON

•r

Switch

Function

Load/Eject

Starts status printings.**

Cleaning

Enter the Default Setting mode

Load/Eject

Cleaning

Enters the particular settings mode. (Factory use only.)
To enter the particular settings mode, it is necessary to push
followings switch while Paper Out LED is blinking.(It blinks about 5
seconds)

Note)

**: status printings prints firmware version, ink counter, selected code page and nozzle check

patterns.

•q

Particular setting mode

•r

Switch

Function

Load/Eject

Initialize EEPROM *** and reset Timer IC.

Note)

***: Refer to EEPROM map.

Table 1-19. Panel Function

Table 1-20. Panel Function with Power ON

Table 1-21. Particular Setting Mode