Epson 440 Manuale Utente

1.  Removing the upper housing. (Refer to section 3.2.1)
2.  Removing the carriage assembly (Refer to section 3.2.5.6)
3.  Remove 2 screws (No.1) at the top of mechanism and remove “GUIDE PLATE, CABLE”.
4.  From the back of the mechanism, unhook the springs from the frame and remove “PAPER

 GUIDE, ASSEMBLY, UPPER” (total 6 pieces).

5.  Unhook “PAPER GUIDE, FRONT;B” and remove it.
6.  Unhook the both shaft holders of “ROLLER, ASSEMBLY, PAPER EXIT” and remove it.
7.  Unhook the left shaft holder of “ROLLER, ASSEMBLY, PF” and rotate it as to match with the cut

 out of the frame.

8.  Slide “ROLLER, ASSEMBLY, PF” to the left and pulling it out.
 

 

When reinstalling “PAPER GUIDE, ASSEMBLY, UPPER” at right-most position (viewed from the

   front), be careful with the detection lever of the PE sensor.

Be careful not to damage the hook of “PAPER GUIDE, FRONT;B” during disassembly and

   assembly.

Be careful not to damage the black coated part of “ROLLER, ASSEMBLY, PF” during

   disassembly and assembly.

Be careful not to damage the gears.

PAPER GUIDE, LEFT

(6 pieces)

SHAFT, PAPER GUIDE, UPPER

TWIST SPRING, 117.6

GUIDE PLATE, CABLE

PAPER GUIDE, ASSEMBLY, UPPER