Primera Technology 032910-511262 Manuale Utente

4B.  Create a Label

1. Click the Create a Label button to open the SureThing

CD Labler or Disc Cover program. These programs will

allow you create a label. 

2. Follow the instructions in Section 3 D or E to create a

label using Sure Thing or Disc Cover.

3. Once you have designed the label, save it and close the

program. A message will appear asking if you would

like to use the label file you just created in your current

project. Click Yes to use it in your project. Once you

choose your label a preview will be displayed.

5. After selecting your label to print it is important to check

the Printer Settings.  These settings are dependent upon

the specific discs you are using.  Each disc (media) brand

or type has a different sized non printable outer margin or

inner diameter.  It also has a different printable surface.  
For Primera TuffCoat branded discs simply choose your

media from the drop down list, the settings will be 

adjusted accordingly.

If you have other media, you may need to measure the

unprintable outer margin and the inner diameter with a

clear millimeter ruler to find the correct size to input here.

For the outer margin,

measure from the edge

of the disc to the begin-

ning of the white print-

able surface.  For the

inner diameter measure

from one side of the

unprintable hub to the

other. The unprintable

inner diameter will

almost always be larger

than the center hole of

the discs (15mm).

511262.qxd  10/15/2009  10:35 AM  Page 19