Primera Technology 032910-511262 Manuale Utente

If you need to change cartridges, you can click the Change

Cartridge button in the Configuration Utility.  This ensures the

most accurate tracking of ink levels.  To change a cartridge,

click the Change Cartridge button.  The cartridge holder will

move to the center of the Publisher to make it 

easier to install the cartridges.  Lift the top cover and install 

the cartridges and described in Section 2 of this manual.  Once

installed, click the OK button and the system will update your

cartridge levels.

The Cartridge Alignment prints a test print and then 

automatically scans the print to configure your printer for 

bidirectional printing and to align the color and black 

cartridges for Color+Black printing. It is important to perform

this calibration every time you change a cartridge. If you forget

to perform this calibration you will be prompted to do so

before your first print from the new cartridge.

The Image Centering button will print a test pattern on your

disc to help you center the printed image on your disc.  If you

see a half moon sliver of white un-printed space on the 

outside or inside of your disc, you may need to run this 

calibration.
Before you run the 

centering test print

 make sure the Publisher

has discs and ink cartridges installed, and it is connected and

ready to receive a print job.  The Publisher will pick a disc and

print a scale of numbers on it.  You will be prompted to open

the Publisher's front cover, rotate the printed disc

180 degrees, reload it into the input, and close

the cover.  Click OK when ready and the

Publisher will pick the disc and print another

scale of numbers.  

511262.qxd  10/15/2009  10:37 AM  Page 49