Primera Technology 6 Manuale Utente

flashing on 

solid

Cartridge Problem. Either the wrong 

rapidly

cartridge or no cartridge is installed. 

If the proper cartridge is installed, 

but the error continues, the printer 

may not be able to properly detect 

the cartridge. There is a multi-colored 

barcode label on the bottom of the 

ink cartridge which the printer uses 

to identify the cartidge. If this label is 

damaged, the cartridge may not be 

detected properly.

Both lights are flashing at the 

Ink Low Warning. You can either 

same time rapidly and the

replace the cartridge now (see Section

printer has paused.

2-B or 2-E) or you can press the Disc

Tray button to continue printing.

Note: If you do replace the cartridge

now then the ink levels will be

cleared. (It assumes you replaced

with a fresh cartridge.) If you instead

press the Disc Tray button to 

continue then the ink levels will not

be cleared and you will not be

warned again until a new cartridge

is installed.

Both lights are blinking at the 

Waiting for you to specify if you’ve

same time in this sequence: 

installed a new COLOR, Black or Photo 

five blinks, pause, repeat . . .

Cartridge.  Press the  Power button to 

specify a new COLOR Cartridge or 

press the Ink Cartridge button to specify 

a new Black or Photo Cartridge.  You 

will get to this point by first pressing 

the Ink Cartridge button, installing a 

new cartridge and then pressing and 

holding the ink cartridge button.

See Section 2-E for more details.

510901.qxd  5/26/2004  11:21 AM  Page 25