Printek 4503 Manuale Utente
Printek Emulation
Page 7-7
Print Single Character
ESC \ n
Prints the character n from the selected font. This sequence may be used to print a
character that is normally treated as a control code.
character that is normally treated as a control code.
Example: The following escape sequence will print a left arrow, if a Proprinter font
is selected. This character is normally not printable, since it is treated as the ESC
control code.
is selected. This character is normally not printable, since it is treated as the ESC
control code.
Escape Sequence:
ESC
\
ESC
Hexadecimal:
1B
5C
1B
Line Pitch
Set Line Spacing to n/288"
ESC LF n
Sets the line spacing to n/288 of an inch per line. 0
≥
n
≥
255. Overrides the "LPI:"
value in the "Setup: FORM" menu.
Example: The following escape sequence will set line spacing to 1/6 of an inch per
line (6 lpi).
line (6 lpi).
Escape Sequence:
ESC
LF
48
Hexadecimal:
1B
0A
30