Primera Technology BravoTM Manuale Utente

4. The Recorder Tray then automatically shuts.

Through software control, you can perform a test on each

disc before recording.  If a disc does not pass (meaning that

all or part of that disc is not recordable), the Robotic Disc

Transporter picks it out of the 

CD Tray 

and sends it to the

Reject Area

. 

5. The Recorder is now writing to the disc. If you were to

fully record a CD with data, audio, video or music 

(650 MB), recording time is about 3 ½ minutes each.  

A full DVD records in about 30 minutes. Most jobs don't

fill the entire disc, so recording time is usually less than

this.  After recording, the Recorder Tray opens

automatically. The Robotic Disc Transporter will lift the

disc out of the Recorder Tray. The Recorder Tray will 

close, and the Printer Tray will open. The Robotic Disc

Transporter will lower the disc into the Printer Tray, and

the Printer Tray will then automatically close.

6. If publishing more than one disc, the Robotic Disc

Transporter will load the Recording Drive with a blank

disc from the 

Input Bin

 to start recording the next round.

7. Once recording has started, the Publisher will be start

printing directly onto the surface of the recorded disc. This

simultaneous recording and printing of discs greatly

increases the throughput of your Publisher.

510701a.qxd  3/13/03  11:05 AM  Page 6