Printronix T5000 Manuale Utente
Chapter 3
RFID CONTROL Menu
54
Tag Write Cnt
This menu item displays the number of tags written since the last
Clear Tag Stat operation has been initiated. (See “Clear Tag Stat”
below.)
Clear Tag Stat operation has been initiated. (See “Clear Tag Stat”
below.)
Failed Tag Cnt
This menu item displays the number of failed tag write attempts
since the last Clear Tag Stat operation has been initiated. (See
“Clear Tag Stat” below.)
since the last Clear Tag Stat operation has been initiated. (See
“Clear Tag Stat” below.)
Clear Tag Stat
This menu item clears the Tag Write Cnt and Failed Tag Cnt menu
items when selected.
items when selected.
Admin User Menu Items
To see these menu items, set Admin User to Enable in the
PRINTER CONTROL menu. (Refer to the
PRINTER CONTROL menu. (Refer to the
User’s Manual.)
IMPORTANT
Admin User menu items should only be used for
troubleshooting.
troubleshooting.
RFID Test
This menu item reads the tag in range of the internal RFID antenna
and reports the tag data to the debug port and momentarily
displays it on the operator panel. It is primarily intended for
development verification by checking that the system is working.
and reports the tag data to the debug port and momentarily
displays it on the operator panel. It is primarily intended for
development verification by checking that the system is working.
Auto Retry
This menu item allows the user to specify the number of automatic
(internal) retries that the RFID UHF encoder will attempt before
declaring a tag error. The default is 3.
(internal) retries that the RFID UHF encoder will attempt before
declaring a tag error. The default is 3.
F/W-Version
This menu item displays the reader firmware version.