Ricoh DDST Unit Type B Manuale Utente
Using the Printer Function
18
3
C
Gently insert paper face down
into the bypass tray.
into the bypass tray.
1.
Extender
2.
Paper guides
Note
❒ Do not stack paper over the lim-
it mark, otherwise a skewed im-
age or misfeeds might occur.
age or misfeeds might occur.
❒ Open out the extender to sup-
port paper sizes larger than A4
L, 8
L, 8
1
/
2
"×11" L.
❒ Fan the paper to get air between
the sheets to avoid a multi-sheet
feed.
feed.
❒ When setting an OHP transpar-
ency, make sure that its front
and back sides are properly po-
sitioned.
and back sides are properly po-
sitioned.
❒ Select paper type when printing
onto OHP transparencies or
thick paper (over 105g/m
thick paper (over 105g/m
2
). For
❒ Select paper type when printing
onto envelopes. For details, see
p.21 “Setting envelopes”.
p.21 “Setting envelopes”.
❒ Set the paper size, see p.18 “Set-
Setting the paper size
Note
❒ You can set paper size using the
printer driver. The following pro-
cedures are not necessary when
setting paper size using the printer
driver.
cedures are not necessary when
setting paper size using the printer
driver.
❒ The paper size set using the printer
driver has priority over that set us-
ing the control panel.
ing the control panel.
❒ When the printer driver is not
used, make settings using the con-
trol panel.
trol panel.
Reference
For printer driver settings, see the
printer driver Help.
For details about setting custom
sizes, see p.19 “Setting custom size
paper”.
For printer driver settings, see the
printer driver Help.
For details about setting custom
sizes, see p.19 “Setting custom size
paper”.
A
Press the {User Tools/Counter} key.
B
Select [Printer Features] using the
{U} or {T} key, and then press
the {OK} key.
the {OK} key.
C
Select [Paper Input] using the {U}
or {T} key, and then press the
or {T} key, and then press the
{OK} key.
AAW020S1