Philips 5900 Manuale Utente

134

AXIS 5900 User’s Manual

The test button is located on the front right hand side of the AXIS 5900 

and is used for:

•

Printing a test page to check the connection to the printer.

•

Printing a parameter list to see the print server’s current settings.

•

Performing a Factory Default of the print server.

If you want to change any of the parameters, use one of the methods 

described in “Management and Configuration” on page 92.

Press the test button once to print a test page. The test page contains 

basic information about the AXIS 5900. It is recommended that you print 

a test page every time you connect the print server to a printer.

Press the test button twice to print a parameter list showing the current 

AXIS 5900 settings. This list provides comprehensive details of all the 

parameters and their current status. Refer to “The Parameter List” on page 

1. Remove the external power supply to switch off the print server.

2. Press and hold down the test button while you reconnect the external power 

supply.

3. Continue to hold down the test button until the Network indicator remains 

constantly lit. This should take about 20 seconds.

4. Restart the print server by disconnecting and reconnecting the external 

power supply.

The Axis Network Print Server is now reset to factory default settings.

The test page is printed on LPT1 by default. If you want to print the test page on LPT2, you 

should set the 

Internal Printout Destination parameter to LPT2 from the internal Web pages 

under  

Admin | General Settings | General.

A Factory Default will reset all AXIS 5900 parameters and settings to their default values, 

except:
• Installed certificate
• Private key