Philips 5900 Manuale Utente

AXIS 5900 User’s Manual

67

4. Shutdown Tomcat and the NetWare Enterprise Web Server on the NetWare 

file server by executing the following commands:

Type "NSWEBDN" <Enter>
Type "TOMCAT33 -STOP" <Enter>
Type "NVXADMDN" <Enter>

5. Map the next available drive (e.g. G:) to the root of volume SYS on your 

NetWare server. 
From the temporary directory where 

axisIPP-snap-in.zip has been 

unzipped, run the batch file

 AxisIPP.bat (default G:). 

If the drive G: is not available, you have to edit the batch file and change 
the drive to next available one.
Check that each line in the batch file is executed without failure.

6. Restart Tomcat and the NetWare Enterprise Web Server on the file server 

by executing the following commands:
Type "TOMCAT33" <Enter>
Type "NVXADMUP" <Enter>
Type "NSWEB" <Enter.

7. Access the iManager Web page on the NetWare server by opening the 

following URL: 
https://<IP address of NW server>:2200/eMFrame/iManager.html
You have to authenticate.

8. Click on 

iPrint Management on the left pane and select Create Printer.

9. On the right pane, verify that the newly installed 

Configuration is under the Gateway type drop-down menu.
If not, it may be necessary to restart the NetWare server.

Now you are ready to use the AXIS IPP Gateway Configuration for installing 
iPrint printers. You have to have 

Administrator rights to install the printers 

through iPrint.

1. Connect a printer to any port of the AXIS 5900.

2. Connect the print server to the network.

3. Connect the power adapter.

4. Start the printer and the print server.

5. Log in as Admin.

6. Use a Web browser and the local host URL to login into iManager on your 

NetWare server.

7. Open your browser to the following URL: 

https://<IP address of NW server>:2200/eMFrame/iManager.html 
You have to authenticate.

8. Click on 

iPrint Management on the left pane.