Philips 5900 Manuale Utente

AXIS 5900 User’s Manual

99

Check the following before printing wirelessly. Click Admin | Network 

Settings | Detailed View | WLAN to check the print server settings.
•

The Network Mode parameter must be set to Auto Sense or WLAN. This 
parameter is set on the Admin | General Settings page.

•

To increase security, enable HTTPS before you set the WEP keys. HTTPS 
enabled requires that you install a certificate. See 

•

Check that the WLAN network interface is properly configured in the 
workstation/laptop trying to access the Axis Network Print Server print 
server. 

•

All communicating clients must be in the same operating mode, i.e. ad 
hoc or infrastructure mode.

•

Check that the SSID and the WEP keys are set according to your WLAN 
network settings. See 

 on page 24 for more 

information.

•

Check that the radio frequency channel setting is the same on all 
communicating clients and that the channel is set according to the 
requirements in your country.

Frequency Bands and

Channels

* (France) outdoor use permitted on private property with prior authorization

The Axis Network Print Server has a powerful facility for altering the 

print data. This means that your desired print format can be realized on 

any type of printer. The following actions can be invoked from the Axis 

The default Network Speed value is AUTO_SENSE. This option is the correct 
option for the majority of users. If you choose the incorrect network speed 
option for your network, you may lose contact with the print server. In order 
to reset the Network Speed parameter to AUTO_SENSE, you will have to 
perform a factory default on the print server.

In Macintosh environments, the 

ad hoc mode is referred to as computer to computer mode 

and the 

infrastructure mode is referred to as Airport network.

Country

Frequency

Available Channels

Default Channel