M-S Cash Drawer 7193 Manuale Utente

About the 7193 Printer

7193 Owner’s Guide

May 1996

4

Thermal receipt paper and other supplies can be ordered from several
recommended and qualified suppliers.

The 7193 requires “fax grade” thermal paper with the following dimensions:

• 

Diameter: 80 mm maximum (3.15 in.)

• 

Length: 83 meters (273 ft.)

• 

Width: 80 mm ± .5 mm (3.15 ± .008 in.)

The paper must not be attached at the core or the printer will be damaged when
the paper runs out. When the paper runs out, the printer stops printing and turns
on the Paper Out light (red) on the operator panel. There is no indication or
automatic signal when the paper runs low. It is recommended that you use a
paper roll with a colored stripe at the end of the roll to indicate that the paper is
running low.

The grades of paper listed here will give the best print quality. When more than
one stock or paper grade number is listed, the first number (standard density)
provides better image density. You may order paper directly from AT&T Global
Information Solutions. Contact your Axiohm supplier for ordering paper
manufactured by Kanzaki (paper grades listed on the next page).

AT&T Global Information Solutions Company
Media Products Division
9995 Washington Church Road
Miamisburg, OH  45342
Voice: 1(800)543-8130 (toll free), or local listing of Media Products sales office

: 878559 (standard density), 856966 (light density)