M-S Cash Drawer 7193 Manuale Utente

Pagina di 118
7193 Owner’s Guide
Setting Up the Printer
May 1996
Testing the Printer
Run this test to check the printer. The test prints the settings for several functions,
prints all variations of the character sets, and partially cuts the paper between
each variation. See the “Diagnostics” chapter for a description of the functions.
A sample printout (RS-232C) is shown later in this section. The printouts for other
models models are similar. The test ends with a partial cut, then begins again.
Several feet of paper can be used to print one pass of the test.
Additional diagnostic tests may be performed by a trained service representative.
For more information, see “Diagnostics” later in this book.
1.  Press the On Line Button on the operator panel to take the printer off-line.
The On Line light turns off indicating the printer is off-line.
2.  Press and hold the Paper Feed button while pressing the On Line Button.
3.  Let go of the Paper Feed button once the printing begins.
The printer begins printing the data and character sets. This can be given to a
service representative if it appears there is a problem.
4.  To stop the test, press the On Line button.
The On Line light turns off indicating the printer is off-line.
5.  To return to the on-line mode, press the On Line button again.
The printer is ready to receive and print data from the host system.