M-S Cash Drawer 7193 Manuale Utente
7193 Owner’s Guide
Solving Problems
May 1996
Solving Problems
The 7193 printer is a simple, generally trouble-free printer, but from time to time
minor problems may occur. For example, the power supply may be interrupted
or the printhead may overheat for some reason.
minor problems may occur. For example, the power supply may be interrupted
or the printhead may overheat for some reason.
Lights on the operator panel will signal that something may not be operating
properly: one green light and one red light may either flash or glow continuously
as described in the following table and on the following pages.
properly: one green light and one red light may either flash or glow continuously
as described in the following table and on the following pages.
Operator Panel Lights
The following chart describes the operator panel lights. See “Correcting
Problems” on the next page for more information about each of these conditions.
Problems” on the next page for more information about each of these conditions.
Light
Condition
Meaning
Action Required
Green1 On
Printer is on-line
None
Green1 Off
Printer is unplugged or off-
line
line
Connect printer to host or
power supply and turn on
power supply and turn on
Green1 Flashing Printer is in diagnostics
mode
Set DIP switch #1 to Off (see
“Setting Switches,” p. 12)
“Setting Switches,” p. 12)
Red2
Off
No fault conditions
None
Red2
On
Paper out, cover open, or
knife won't home
knife won't home
Reload paper, close cover, or
clear paper jam
clear paper jam
Red2
Flashing Printhead too hot or
voltages out of range
Wait for printhead to cool down
1Light labeled On Line.
2Light labeled Paper Out.
2Light labeled Paper Out.