M-S Cash Drawer 7193 Manuale Utente

Pagina di 118
Diagnostics
7193 Owner’s Guide
May 1996
42
Testing Receipt Printing
This function allows you to select various print tests. You can also test the
printing by following the procedures in “Testing the Printer” on page 23 without
having to change the DIP switches. A sample test printout is on page 24.
Caution:
  The DIP switches are set at the factory to predetermined settings and
should generally not be changed. If you must change the settings, do so carefully
to avoid changing other functions.
1.  Turn the power off.
2.  Turn the printer over and note what the current DIP switch settings are.
3.  Set the switches to the settings in the table that match the test you want.
Switch 1
Switch 2
Switch 3
Switch 4
Switch 5
Switch 6
Option
On
Off
Off
Off
Off
Off
Sample Receipt1
On
Off
Off
Off
Off
On
Continuous Sample
Receipt
On
Off
Off
Off
On
Off
Character Sets1
On
Off
Off
Off
On
On
Continuous Character
Sets2
1The Paper Feed button is used to begin the test.
2Default
4.  Turn the power back on to enter the settings into the EEROM.
The On Line light (green) blinks. If either the continuous sample receipt or the
continuous character sets is selected, the printer will automatically begin
printing.
5.  Press the Paper Feed button to print the sample receipt or the character sets
(whichever was selected).
6.  Press the Paper Feed button or turn the printer off to stop the test.
7.  Turn the power off.
8.  Set the DIP switches to the former settings.
DIP switch 1 must be Off to return the printer to the on-line mode.