Lexmark Pro915 Manuale Utente
3
Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with
.
Note: If you continue to have problems, then try another USB port on the computer. You may have connected to a
defective port.
defective port.
R
ESTART
THE
COMPUTER
Scanning takes too long or freezes the computer
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
C
LOSE
OTHER
SOFTWARE
PROGRAMS
THAT
ARE
NOT
BEING
USED
R
ESTART
THE
COMPUTER
Cannot scan to a computer over a network
If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:
M
AKE
SURE
THE
PRINTER
AND
THE
DESTINATION
COMPUTER
ARE
CONNECTED
TO
THE
SAME
NETWORK
M
AKE
SURE
THE
PRINTER
SOFTWARE
IS
INSTALLED
ON
THE
DESTINATION
COMPUTER
E-mail troubleshooting
•
•
Cannot send e
‑mail
C
HECK
YOUR
E
‑
MAIL
CONFIGURATION
SETTINGS
Make sure you have correctly completed the e
‑mail setup and successfully configured an SMTP server.
C
HECK
YOUR
NETWORK
CONNECTION
Make sure the printer is connected to an Ethernet or wireless network. Your network must be connected to the
Internet for the printer to communicate with the SMTP server.
Internet for the printer to communicate with the SMTP server.
C
HECK
YOUR
PROXY
CONFIGURATION
Your proxy server configuration should allow SMTP server connections. For help with your proxy server or SMTP
settings, contact your system support person.
settings, contact your system support person.
Troubleshooting
157