Lexmark 7500 Series Manuale Utente

If Ready or Busy Printing is listed as the Printer Status on the Status tab of the Solution Center while you are
attempting to print, try the suggestions below. Next, test the solution by sending a document to print.

Check that the USB cable is connected to the computer. The USB port on the back of the computer is marked

by the 

 USB symbol. Plug the long, flat end of the USB cable into this port.

Make sure that the smaller, more square end of the USB cable is plugged into the back of the printer.

Check that the USB cable is not damaged and that the 

 light is on.

Select Photo from the Quality/Copies tab in Printing Preferences.

Click File 

Œ Print.

Click Properties, Preferences, Options, or Setup.

From the Quality/Copies tab, make changes as needed.

Click OK to close any dialog boxes that are open.

Try printing a different image. If it prints correctly, the problem may be with the program you are using. For more
information, see the program documentation.

Do one of the following:

In Windows Vista, click 

.

In Windows XP and earlier, click Start.

Click Programs or All Programs 

Œ Lexmark 7500 Series.

Click Solution Center.

From the Maintenance tab, click Print a test page.

Compare the printed page to the image displayed on the computer screen. If the printed image matches the
image displayed on the screen, then you are finished.

If the test page did not print at all or has quality problems, attend to any error messages that appear on the
screen.

These are possible solutions. Try one or more of the following:

If 

 is not on, the printer may not be receiving power.

Press 

.

Plug the printer into a different electrical outlet.

If the printer is plugged into a surge protector, unplug the printer, and plug it directly into an electrical outlet.