Lexmark 7500 Series Manuale Utente
![Lexmark](https://files.manualsbrain.com/attachments/878cae5fca737841ce37f41a7ee73881a8b54f60/common/fit/150/50/823435a5b9c868f91a4b7f8b99ddfd9b9c699edf1f6ff104003e82a92d7f/brand_logo.png)
8
Press
or
repeatedly until Off appears.
9
Press
to save the setting.
Can receive but not send faxes
These are possible solutions. Try one or more of the following:
Check mode selection
To make sure the printer is set for faxing:
1
Press
or
repeatedly until Fax is highlighted.
2
Press .
Check document placement
Load the original document facedown in the lower right corner of the scanner glass.
Check the Dial Prefix setting
1
From the control panel, press
or
repeatedly until Fax is highlighted.
2
Press .
3
Press
or
repeatedly until the Fax Setup submenu is highlighted.
4
Press .
5
Press
or
repeatedly until the Dialing and Sending submenu is highlighted.
6
Press .
7
Press
or
repeatedly until you reach Dial Prefix.
8
To change the setting, press
or
repeatedly until Create appears.
9
Press .
10
Enter the prefix to be dialed before each telephone number.
11
Press to save.
Check Speed Dial number
•
Check to make sure Speed Dial has been programmed for the number that you wish to dial. See “Setting up
Speed Dial” on page 133.
Speed Dial” on page 133.
•
As an alternative, dial the telephone number manually.
Be sure that printer is detecting a dial tone
•
•
Check the Dial Method setting.
1
Listen for a dial tone. If you hear a dial tone but the printer hangs up without dialing, this means it did not
recognize the dial tone.
recognize the dial tone.
2
From the control panel, press
or
repeatedly until Fax is highlighted.
3
Press .
192