Konica Minolta Network Printer Manuale Utente

Output Modes 6-7

Output Modes

Staple-Sort Mode Using Primary (Main) Tray

Use this mode when you want to offset and staple each printed set. Stapling position and 
number of staples (1 or 2) can be designated.
Each finished set will be offset from the next printed set.
With the Primary (main) tray initially selected, FS-110/210 outputs the printed sheets 
FACE DOWN in the proper order.

❒ Stapled paper at 1 position: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11" (5.5"x8.5" is available in 

portrait orientation only.)

❒ Stapled paper at 2 positions: only 8.5"x11" paper loaded with larger vertical dimension

11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11" paper loaded with larger 

horizontal dimension

❒ Paper capacity for 20 lb: 1,000 sheets (Variable according to the number of pages to be stapled. 

See p. 4-5 for details.)

❒ Staple capacity: 50 sheets 20 lb (5.0 mm thick or less)

(Staple capacity is changeable, and may be set to 45, 40, or 35 by your service 

representative.)

❒ Staple position: 1 oblique staple*; 2 parallel staples

*: Oblique staple may change to parallel staple when using some print sizes.

NOTE: Using excessively curled paper or some types of thin paper in Staple-sort mode may cause poor results 

in arrangement of the stapled sets.

3

2

3

2

1

3

2

1

3

2

3

1

3

2

1

1 oblique staple

2 parallel staples