LevelOne FPS-2101TXU Manuale Utente
Windows NT Server (TCP/IP)
This chapter explains how to configure and use your LevelOne
Printer Server in the Windows NT Server TCP/IP environment.
Printer Server in the Windows NT Server TCP/IP environment.
Software Requirements
• Windows NT3.51 or later
• TCP/IP network protocol
• TCP/IP remote printing system (provided with Windows NT; configuration is
• TCP/IP network protocol
• TCP/IP remote printing system (provided with Windows NT; configuration is
described in this document).
LevelOne Printer Server Configuration
Note: The LevelOne Printer Server should be configured FIRST.
Refer to Chapter 7 - TCP/IP for details on configuring the LevelOne Printer Server. It must
have a valid IP Address.
have a valid IP Address.
Note that if you have a DHCP server, the LevelOne Printer Server is assigned an IP
Address of 0.0.0.0. It will then obtain an IP Address from the DHCP server. But using
DHCP is only feasible if you have DHCP management software which allows you to take
advantage of this feature. Otherwise, the LevelOne Printer Server’s IP Address will be
unknown, and connection to it will be impossible. In this case, configure the LevelOne
Printer Server for a static IP Address.
Address of 0.0.0.0. It will then obtain an IP Address from the DHCP server. But using
DHCP is only feasible if you have DHCP management software which allows you to take
advantage of this feature. Otherwise, the LevelOne Printer Server’s IP Address will be
unknown, and connection to it will be impossible. In this case, configure the LevelOne
Printer Server for a static IP Address.
- 60 -