Sharp FODC550 Manuale Utente
LOADING PAPER
15
2
Special papers
Follow these guidelines when using special papers.
● Use SHARP recommended transparency film and label sheets. Using other
● Use SHARP recommended transparency film and label sheets. Using other
than SHARP recommended paper may result in misfeeds or smudges on
the output. If other than SHARP recommended media must be used, feed
each sheet one at a time using the bypass tray (do not attempt continuous
copying or printing).
the output. If other than SHARP recommended media must be used, feed
each sheet one at a time using the bypass tray (do not attempt continuous
copying or printing).
● There are many varieties of special paper available on the market, and
some cannot be used with this machine. Before using special paper,
contact your SHARP authorized dealer.
contact your SHARP authorized dealer.
● Before using other than SHARP recommended paper, make a test copy to
see if the paper is suitable.
LOADING THE PAPER TRAY
1
Raise the handle of the paper tray
and pull the paper tray out until it
stops.
and pull the paper tray out until it
stops.
2
Push the pressure plate down until it locks in place.
Push the center of the pressure plate down until it locks into place.
Make sure that the paper is not torn, is free of dust, and has no wrinkles
or curled edges.
or curled edges.
Note
FO-DC550_Copy(Sec).book 15 ページ ２００４年３月２５日 木曜日 午後３時４４分