Savin 9927DP Manuale Utente
What to do If Something Goes Wrong
88
3
Duplex
Problem
Cause
Action
Order of copies is not
correct.
correct.
You set originals in the incor-
rect order.
rect order.
When setting a stack of origi-
nals in the document feeder,
the last page should be on the
bottom.
nals in the document feeder,
the last page should be on the
bottom.
If you set an original on the
exposure glass, start with the
first page to be copied.
exposure glass, start with the
first page to be copied.
In Margin Adjust-
ment mode, parts of
the original image are
not copied.
ment mode, parts of
the original image are
not copied.
The margin is too wide.
. See “04. Top
.
Orientation of copies
(Top to Top, or Top to
Bottom) is not correct.
(Top to Top, or Top to
Bottom) is not correct.
You set originals in an incor-
rect direction or the orienta-
tion setting is incorrect.
rect direction or the orienta-
tion setting is incorrect.
Select the correct orientation,
or set originals correctly.
or set originals correctly.
Note
❒ If you set A3, 11"
×
17" or
B4JIS, 8
1
/
2
"
×
14" originals
as shown below, for exam-
ple, take one of the two ac-
tions described below the
illustration.
ple, take one of the two ac-
tions described below the
illustration.
❒ Select
[Top to Bottom]
to
make copies in “Top to
Top” orientation. Select
Top” orientation. Select
[Top to Top]
to make copies
in “Top to Bottom” orien-
tation.
tation.
❒ Alternate the originals as
shown below when setting
them.
them.