Sharp AR-C265P Manuale Utente

Sharp AR-C265P User’s Guide

104

    

Note: Factory default settings are shown in bold.
The printer automatically adjusts color balance and density at 

appropriate intervals, optimizing the printed output for bright 

white paper viewed in natural daylight conditions. 
The items on this menu provide a means of changing the 

default settings for special or particularly difficult print jobs. 

Settings revert to their default values when the next print job 

is complete.

      

DENSITY 
CONTROL

AUTO
MANUAL

AUTO = image density is automatically 
adjusted:
• at  power  on
• when a new image drum or toner 

cartridge is installed

• at intervals of 100, 300 and 500 drum 

counts

Auto adjustment takes up to 55 
seconds.
Switch to manual only if you wish to 
initiate Density Control manually using 
the printer menu.

ADJUST DENSITY [EXECUTE]

Selecting this will perform the auto 
density set up.

AJST 
REGISTRATION

[EXECUTE]

Performs automatic color registration 
adjustment. Normally this is done at 
power on and when the top cover is 
opened and then closed. This process 
accurately aligns the cyan, magenta 
and yellow images to the black image.

C REG FINE 
ADJUST
M REG FINE 
ADJUST
Y REG FINE 
ADJUST

-3 to + 3 in 
increments of 1
Default = 0 

Performs fine adjustment of image 
timing in relation to the black image 
component.
A positive setting will darken the color; 
a negative setting will lighten the color.