OKI C7100 Manuale Utente
C7100/C7300/C7500 Accessories • 392
4. Connect the power cable and switch on the printer.
5. Print a MenuMap as follows to confirm the network interface card
is correctly installed.
a. Press the MENU button twice to access the
INFORMATION
MENU
.
b. Press the SELECT button and confirm that
PRINT MENU MAP
is
displayed.
c. Press the SELECT button to print the MenuMap.
d. Check that NETWORK MENU appears on the MenuMap.
ADDITIONAL MEMORY
Additional memory increases the printer’s capacity to process
complex data.
complex data.
• Installing additional memory is recommended if carrying out
duplex printing or if error messages appear when printing complex
data.
data.
• Also used for graphic intensive applications on Networks.
• Additional memory is available in 64Mb, 128Mb, and 256Mb
modules.
CAUTION!
• Due to the design of the memory modules, it is very
important to install the modules in sequence according
to the part number/capacity printed on the module
to the part number/capacity printed on the module
• Use the sequence Slot
1
® Slot
3
® Slot
2
, placing the
highest capacity (MB) module in Slot 1.
• If the modules being installed are higher in capacity
than the one(s) already installed, remove the ones
installed, sort them properly with the new ones and
reinstall them in the proper 1
installed, sort them properly with the new ones and
reinstall them in the proper 1
® 3 ® 2 sequence.
For example:
SDRAM:
256 MB
128 MB
64 MB
Place in:
Slot 1
Slot 3
Slot 2