GCC Printers 16 Manuale Utente
GCC Elite Color 16 Series User’s Guide
7-11
Interface Menu
Interface Menu
The Interface Menu provides access to the printer interface settings. Use the following proce-
dure to enter the interface menu:
dure to enter the interface menu:
1.
Press the MENU button on the control panel.
2.
Press the NEXT button until the text “Interface Menu” is shown on the second line of
the display.
the display.
3.
Press the SELECT button to enter the interface menu.
4.
Press the NEXT button to move through the submenus: Port, Parallel Setup, Network
Card Setup and USB Setup.
Card Setup and USB Setup.
5.
Use the NEXT or PREVIOUS buttons to scroll through the available settings, then press
the SELECT button to save the setting.
the SELECT button to save the setting.
Submenus
Available Settings (Bold is Default)
Description
Port
Parallel:
On, Off
On, Off
Network Card 1:
On, Off
On, Off
USB:
On, Off
On, Off
This submenu allows you to enable or disable each
individual interface port.
individual interface port.
Parallel Setup
Interpreter:
Auto Switch
PCL
PostScript 3
Auto Switch
PCL
PostScript 3
Format:
Raw
Normal
Binary
Raw
Normal
Binary
Mode:
Bidirectional
Standard
Bidirectional
Standard
Delay Out Close:
On
Off
On
Off
This submenu allows you to set up the parallel
interface.
interface.
Interpreter determines whether the parallel port
will accept only PCL jobs, only PostScript jobs, or
both (Auto Switch).
will accept only PCL jobs, only PostScript jobs, or
both (Auto Switch).
Format sets the default data format mode for the
parallel port.
parallel port.
Mode sets the parallel port to bi-directional or
standard.
standard.
Delay Out Close determines whether the printer
immediately closes communication with the
computer after the job is transmitted, or waits until
the job is processed to do so.
immediately closes communication with the
computer after the job is transmitted, or waits until
the job is processed to do so.