GCC Printers 16 Manuale Utente
GCC Elite Color 16 Series User’s Guide
9
Safety Precautions
When the printer is not used over an extended period of time, switch it off and unplug
it. If an unused printer is left connected to a power source for a long period, degraded
insulation can cause electric shocks, current leakages, or fire.
it. If an unused printer is left connected to a power source for a long period, degraded
insulation can cause electric shocks, current leakages, or fire.
Switch off the printer before connecting the interface cable or options. Connecting the
cable or card with a live printer can cause electric shocks.
cable or card with a live printer can cause electric shocks.
Other Precautions
•
This printer may interfere with radio or television reception, causing flickering or distor-
tion. This can be determined by turning the printer off and on. To correct interference,
perform one, or a combination of the following procedures:
tion. This can be determined by turning the printer off and on. To correct interference,
perform one, or a combination of the following procedures:
•
Move the printer away from TV and/or radio.
•
Reposition the printer, TV and/or radio.
•
If the printer, TV and/or radio are plugged into the same outlet, unplug them, then plug
them into different outlets.
them into different outlets.
•
Reposition the TV and/or radio antennas and cables until the interference stops. For exter-
nal antennas, consult your local electrician.
nal antennas, consult your local electrician.
•
Use coaxial cable with the antennas.
Operating Precautions
Do not place any liquid containers such as vases or coffee cups on the printer.
Liquids spilled on the printer constitue a fire and electrical shock hazard.
Liquids spilled on the printer constitue a fire and electrical shock hazard.
Do not place any metal parts such as staples or clips on the printer. If metal and flam-
mable parts get into the printer, they can short-circuit internal components, and cause
fire or electric shocks.
mable parts get into the printer, they can short-circuit internal components, and cause
fire or electric shocks.
If debris (metal or liquid) gets into the printer, turn off and unplug the printer. Contact
your GCC Customer Support Center. Operating a debris-contaminated printer can
cause fire or electric shocks.
your GCC Customer Support Center. Operating a debris-contaminated printer can
cause fire or electric shocks.
Never open or remove printer covers that are secured with screws unless specifically
instructed to do so in the this manual. A high-voltage component can cause electric
shocks.
instructed to do so in the this manual. A high-voltage component can cause electric
shocks.
Do not try to alter the printer’s configuration or modify any parts. An unauthorized
modification can cause smoke or fire.
modification can cause smoke or fire.
This printer complies with the IEC60825 (Class 1) international laser standard. This
means that the printer does not present any risk of injury to persons from laser radia-
tion. Various covers confine the laser radiation to the inside of the printer; hence, users
cannot incur injury from the laser under normal operating conditions. Removing cov-
ers, unless instructed to do so in this manual, can cause injury from laser radiation.
means that the printer does not present any risk of injury to persons from laser radia-
tion. Various covers confine the laser radiation to the inside of the printer; hence, users
cannot incur injury from the laser under normal operating conditions. Removing cov-
ers, unless instructed to do so in this manual, can cause injury from laser radiation.