Hi-Touch Imaging Technologies 640DL Manuale Utente
www.hi-ti.com
35
Chapter 5
Frequently Asked Questions
This section documents possible solutions to questions that are frequently asked. If the problem you encounter is not
listed, visit HiTi corporate web site for the most updated solutions or contact HiTi customer service representatives.
listed, visit HiTi corporate web site for the most updated solutions or contact HiTi customer service representatives.
Table 5-1.
Paper Jams/LEDs
Problem
Possible Cause
Solution
The orange LED light blinks.
•
Ribbon door open
•
Ribbon missing
•
Out of ribbon
•
Out of paper
•
Paper jam
•
Paper type mismatched
•
Memory run-out
Different blinkings indicate different problems. See
on page 38 for detailed descrip-
tions.
Printing stops in the middle of
processing.
processing.
The ribbon cartridge is not
installed correctly.
installed correctly.
Install the ribbon cartridge correctly.
The paper is not loaded or
feeding correctly.
feeding correctly.
Load the paper or paper cassette correctly.
Paper jammed
Remove the jammed paper. If this does not work,
turn off the printer and restart it after 1 minute. The
printer will automatically eject the jammed paper.
turn off the printer and restart it after 1 minute. The
printer will automatically eject the jammed paper.
hiti640.book Page 35 Monday, June 24, 2002 2:46 PM