Zebra Technologies ZM400201101L0T Manuale Utente
![Zebra Technologies](https://files.manualsbrain.com/attachments/a78f49d565a2596a8b31f4240e25fed2998da2a0/common/fit/150/50/2656e56263d759e2c7910989c000585d7bce0fb5d50f1f63705e38675fa7/brand_logo.gif)
101
Troubleshooting
LCD Error Messages
3/27/07
ZM400/ZM600 User Guide
79695L-001 Rev. A
LCD Error Messages
for LCD errors, the possible
causes, and the recommended solutions.
Table 15 • LCD Error Messages
LCD Display/
Printer Condition
Printer Condition
Possible Cause
Recommended Solution
The ERROR light flashes.
The printhead was replaced with
one that is not a genuine Zebra™
printhead..
one that is not a genuine Zebra™
printhead..
Install a genuine Zebra™ printhead.
The printer stops; the
ERROR light flashes.
ERROR light flashes.
In thermal transfer mode, ribbon is
not loaded or incorrectly loaded.
not loaded or incorrectly loaded.
Load ribbon correctly. See
.
In thermal transfer mode, the
ribbon sensor is not detecting
ribbon that is loaded incorrectly.
ribbon sensor is not detecting
ribbon that is loaded incorrectly.
1.
Load ribbon correctly. See
.
2.
Calibrate the sensors. See
.
In thermal transfer mode, media is
blocking the ribbon sensor.
blocking the ribbon sensor.
1.
Load media correctly. See
2.
Calibrate the sensors. See
.
In thermal transfer mode, the
printer did not detect the ribbon
even though it is loaded correctly.
printer did not detect the ribbon
even though it is loaded correctly.
1.
Print a sensor profile. See
. The
ribbon out threshold (marked by
the word
the word
RIBBON
) is likely too
high, above the black area that
indicates where the ribbon is
detected.
indicates where the ribbon is
detected.
2.
Calibrate the sensors or load
printer defaults. See
printer defaults. See
or
ERROR CONDITION
INVALID HEAD
ERROR CONDITION
RIBBON OUT