Zebra Technologies ZM400201101L0T Manuale Utente
51
Operations
Load Ribbon
3/27/07
ZM400/ZM600 User Guide
79695L-001 Rev. A
Remove Used Ribbon
To remove used ribbon, complete these steps:
1.
2.
To loosen the ribbon, squeeze it against the ribbon take-up spindle tension blades (
1
). At
the same time, turn the ribbon take-up spindle release knob counterclockwise (
2
).
The tension blades collapse into the ribbon take-up spindle, loosening the ribbon.
3.
Slide the used ribbon off of the ribbon take-up spindle and discard.
Caution •
Do not cut the ribbon directly on the ribbon take-up spindle. Doing so may
damage the spindle.
If the ribbon has not run out, cut or break it before the ribbon take-up spindle (
1
).
1
1
2