Zebra Technologies Z6M Manuale Utente
Zebra Z4M/Z6M Printers User’s Guide
9
3RVLWLRQLQJWKH0HGLD6HQVRU
The correct positioning of the media sensor is important — it can make the difference
between a perfect label and a call to Technical Support!
between a perfect label and a call to Technical Support!
There are two media sensors in this printer: “reflective” and “transmissive.”
5HIOHFWLYH6HQVRU
The reflective sensor detects the “start-of-label indicator” (the notch, hole, black
mark, or gap between die-cut labels).
mark, or gap between die-cut labels).
The reflective sensor must be positioned:
•
directly under the notch, hole, or black mark, or
•
anywhere along the width of the media if there is a gap between labels
The glow of the red light through the media helps you to accurately position the
reflective sensor.
reflective sensor.
NOTE: If you are using continuous media, position the reflective sensor
anywhere under the media so that the printer can detect an out-of-paper
condition.
anywhere under the media so that the printer can detect an out-of-paper
condition.
NOTE: The reflective sensor is compatible with most types of media.
However, if you encounter difficulties with calibration, use the transmissive
sensor. For details, see “Transmissive Sensor” on page 10.
However, if you encounter difficulties with calibration, use the transmissive
sensor. For details, see “Transmissive Sensor” on page 10.