Zebra Technologies Z6M Manuale Utente
Zebra Z4M/Z6M Printers User’s Guide
37
yØÃAÏ
After you have installed the media and ribbon and the Power-On Self Test (POST) is
complete, the front panel display shows “PRINTER READY.” (If the printer fails its
POST, refer to page 75.) Use the front panel display and the four keys directly below
it to set printer parameters for your application.
complete, the front panel display shows “PRINTER READY.” (If the printer fails its
POST, refer to page 75.) Use the front panel display and the four keys directly below
it to set printer parameters for your application.
NOTE: Printers operating on an IP network can be quickly configured using
ZebraLink
ZebraLink
™
WebView (optional ZebraNet
®
PrintServer II required). For
information, refer to ZebraNet Networking: PrintServer II Installation and
User’s Guide.
User’s Guide.
NOTE: Unless otherwise noted, all parameters are listed in the order they are
displayed, starting with “DARKNESS.”
displayed, starting with “DARKNESS.”
(QWHULQJWKH6HWXS0RGH
To enter the programming mode, press the SETUP/EXIT key.
•
Press the INCREMENT (+) or DECREMENT (–) key to scroll to the setting you
wish to change.
wish to change.
•
Press the SELECT key to toggle the functionality of the INCREMENT (+) and
DECREMENT (–) keys.
DECREMENT (–) keys.
•
Press the INCREMENT (+) or DECREMENT (–) keys to increase or decrease the
value; answer “yes” or “no”; print a label; or select the digit you wish to change.
value; answer “yes” or “no”; print a label; or select the digit you wish to change.
•
Press the SELECT key again to use the INCREMENT (+) and DECREMENT (–)
keys to scroll to the desired menu item.
keys to scroll to the desired menu item.
NOTE: An asterisk (*) in the upper left-hand corner of the display indicates
that the value displayed is different than the currently stored value.
that the value displayed is different than the currently stored value.