Zebra Technologies Z6M Manuale Utente
![Zebra Technologies](https://files.manualsbrain.com/attachments/a78f49d565a2596a8b31f4240e25fed2998da2a0/common/fit/150/50/2656e56263d759e2c7910989c000585d7bce0fb5d50f1f63705e38675fa7/brand_logo.gif)
Zebra Z4M/Z6M Printers User’s Guide
67
5HZLQG0HGLD$OLJQPHQW
(Rewind option required)
NOTE: The media /backing should be installed flush against the backplate of
the take-up spindle to prevent the media/backing from winding too loosely.
the take-up spindle to prevent the media/backing from winding too loosely.
Perform the following adjustment if the media does not track properly onto the
take-up spindle.
take-up spindle.
Refer to Figure 29.
1. Turn the adjustment dial clockwise to align the media/backing material toward the
inboard (i.e., mainframe or electronics) side. This is the most likely adjustment.
or
2. Turn the dial counterclockwise to align the media/backing material toward the
outboard (i.e., away from the mainframe or electronics) side.
Figure 29
Printhead
Assembly
Adjustment
Dial
Take-up
Spindle
Backplate