Zebra Technologies 7030 Manuale Utente

Indicators

10/05/2009

TTP 7030™ Technical Manual

P1003636-002

The status indicator (see 

functions:

Error-codes are reset:

• When the conditions causing them are removed.

• When the printer is turned off/on.

• When the 

 printhead release arm is lifted and then lowered.

The control board has two power indicators behind the power connector:

• Green indicator constantly ON: 24 V present 

• Red indicator constantly ON: 5 V OK (generated on control board)

Indicates that the printer is operational.

Indicates warnings of non-severe error. The number of flashes 
reflects the warning-code:

2 flashes: Paper low

This signaling is disabled by default. It can be 

disabled/enabled by setting parameter P52.

3 flashes: Weekend low

Warning-codes are reset automatically when the condition 
causing them are removed.

Indicates severe error. Hold down the Feed button and the 
number of flashes will reflect the error-code.

1 — Presenter jam, paper cannot be ejected / retracted

2 — Cutter cannot return to home position

3 — Out of paper

4 — Printhead lifted

5 — Paper wrapped around platen (under head)

6 — Temp error >60

°

C

7 — Presenter jam, motor cannot rotate

Fast flashes — Checksum error, firmware

Steady light — Wrong firmware type