Zebra Technologies 7030 Manuale Utente

Making A Test Printout

10/05/2009

TTP 7030™ Technical Manual

P1003636-002

Is a power button available for the printer?

Yes

Remove power from the printer.

Hold the feed-forward button depressed while powering ON the printer.

Keep the button depressed until printing starts.



This produces a printout showing the firmware program version and date, 
control board revision number and serial number, name of loaded fonts and 
logotypes, and the parameter settings.

Each successive press of the button will produce a test printout.

Switch the printer OFF and ON again to exit self-test mode.

No

Lift the printhead.

Press and hold the Feed button while lowering the printhead, and keep it 
pressed until after the auto-load is completed.

Release the button.
A self-test printout will be printed.

 this feature was introduced in firmware version 2.44b.