Zebra Technologies 7030 Manuale Utente

10/05/2009

TTP 7030™ Technical Manual

P1003636-002

5

Programming

There are two completely different ways of setting up the printout: Text oriented and driver 
oriented style. 

Command Code

The printout can be seen as the page of a simple word processor. You 
send text and graphics to the printer, which prints the information in the 
same sequence as the data is received. Design features are limited to the 
font stored in the flash PROM of the printer. 
It is possible to select a fixed page length. If you do that, text and 
logotypes can also be printed in landscape orientation. 
There are two text cursors, one for portrait, and one for landscape. The 
start positions of the cursors are the upper left corner for the portrait 
cursor, and the upper left corner for the landscape cursor, see 

. You can switch between these cursors at any time; the 

cursor will retain its last position on the ticket.

Driver oriented

All TTP 70x0 printers can print documents through a driver. When a 
Windows driver is used, you can use any Windows program to design 
the ticket with text, graphics, bar codes or whatever you want to print 
and in any orientation you want. 
The Windows driver issues all the necessary commands. By setting up 
printing preferences in the driver you select how the printer should cut 
and present the printout.