Zebra Technologies R-140 Manuale Utente

Wrinkled Ribbon

Communications

A label format was sent to the printer but not recognized. The

DATA light does not flash.

Zebra R-140 User’s Guide 83

Problem Solution

The ribbon is not loaded correctly.

Load the ribbon correctly. See

The darkness setting is incorrect.

Set the darkness to the lowest possible setting for

good print quality. See

Incorrect printhead pressure or balance.

Set the pressure to the minimum required for good

print quality. See

The media is not feeding correctly. It is

“walking” from side to side.

Make sure that the media guide and media supply

guide touch the edge of the media.

Problem Solution

The communication parameters are

incorrect.

Check the printer driver or software communications

settings (if applicable).
Check the printer host port setting via the front panel

(see

Select the port that matches the one

being used by the host.
Are you using the correct communication cable? See

for the requirements.

Via the front panel, check the protocol setting. It

should be set to “none.” See

Ensure that the correct driver is being used, if

applicable.