Brother HL-2250DN Manuale Utente
Printing Methods
19
1
Note
• Remove each sheet of labels or envelope as soon as it has been printed. Stacking them may cause the
paper to jam or curl.
• If an envelope is creased after they are printed, see Improving the print quality on page 111.
• If envelopes get smudged during printing set the Media Type to Thick Paper or Thicker Paper to increase
• If envelopes get smudged during printing set the Media Type to Thick Paper or Thicker Paper to increase
the fixing temperature.
• (For Windows
®
users) If the DL size double flap envelopes are creased after printing, choose DL Long
Edge in Paper Size, from the Basic tab. Put a new DL size double-flap envelope in the manual feed slot
with the longest edge of the envelope in first, then print again.
with the longest edge of the envelope in first, then print again.
• Envelope joints that are sealed by the manufacturer should be secure.
• All sides of the envelope should be properly folded without wrinkles or creases.
• All sides of the envelope should be properly folded without wrinkles or creases.