Brother HL-2250DN Manuale Utente

Routine Maintenance 

g

Using both hands, slide the manual feed paper guides to the width of the paper that you are going to use.

 

h

Using both hands, put one piece of A4 or Letter size paper in the manual feed slot until the top edge of 
the paper touches the paper feed roller. When you feel the machine pull in the paper, let go. The machine 
will start the Drum Cleaning process. The Ready LED flashes during the Drum Cleaning process.

 

• The machine makes a mechanical noise during the Drum Cleaning process because the machine rotates 

the OPC drum in reverse. This noise is not due to a malfunction of the machine.

• DO NOT put more than one sheet of paper in the manual feed slot at any one time, as it may cause a jam.
• If the paper in the manual feed slot is other than A4 or Letter size, the machine will stop the Drum Cleaning 

process and eject the paper.

• Make sure that the paper is straight and in the proper position on the manual feed slot. If it is not, it may 

not be fed properly, resulting in a skewed printout or a paper jam.

• DO NOT close the back cover (face-up output tray) during the Drum Cleaning process. The machine will 

stop the Drum Cleaning process and eject the paper. It may cause a jam.

• If the machine receives a print job before you put one sheet of paper in the manual feed slot, the machine 

will stop the Drum Cleaning process and print the print job.