Toshiba SATELLITE E105 Manuale Utente

4 Replacement Procedures

4.14 USB board, DC-IN FM card and RGB cable

4-40

Satellite E100/E105/ Satellite ProE100/E105

Maintenance Manual

Installing the USB board, DC-IN, FM card and CRT cable

Install the USB board, DC-IN, FM card and CRT cable according to the following
procedures and Figure 4-27.

Note: Be careful of the kill switch button for the USB board. It can be damaged when
installing the USB board. Make sure it is in the correct position.

1. Connect the FM card cable in to CN2002 and seat the FM card in the correct position.

2. Seat the DC-IN cable in to the base enclosure.

3. Seat the CRT cable in the correct position and securing with one M2x4 black flat

head screw.

4. Seat the RGB cable in the correct position and securing with two M2.8x4.5 black flat

head screws.