Toshiba S500M Manuale Utente

This section describes how to check PCI ExpressCard slot by inspecting a card with PCI 
Express interface and a card with USB 2.0 interface. 

1. Gigabit Ether ExpressCard 
2. USB2.0 5in1 ExpressCard  

(1) Insert the Gigabit Ether ExpressCard into the ExpressCard slot. 

(2) On Windows, open System Property → Hardware → Device Manager window. 

(3) Make sure that the following device is recognized on the Device Manager window. 

Marvell Yukon 88E8053E PCI-E Gigabit Ethernet Controller #2

 

(“#2” is displayed in the PC with a built-in LAN of Gigabit, because the controller is  
 the same one.  “#2” is not displayed in the PC with a built-in LAN of  
 10/100 Megabit.) 

(4) After confirmation, take a “Safety Remove” procedure and pull out the Gigabit Ether 

ExpressCard 

(1) Insert the USB2.0 5in1 ExpressCard into the ExpressCard slot. 

(2) On Windows, open System Property →Hardware → Device Manager window. 

(3) Make sure that the following device is recognized on the Device Manager window. 

USB 2.0 5in1 ExpressCard USB Device

 

(4) After confirmation, take a “Safety Remove” procedure and pull out the USB2.0 5in1 

ExpressCard.