Toshiba L300D Manuale Utente
User’s Manual
4-16
Operating Basics
■
Do not operate DVD MovieFactory immediately after turning on the
computer. Please wait until all Disc Drive activity has stopped.
computer. Please wait until all Disc Drive activity has stopped.
■
When recording to a DV-Camcorder, to ensure you capture all of
your data, let the camcorder record for a few seconds before you
begin recording your actual data.
your data, let the camcorder record for a few seconds before you
begin recording your actual data.
■
CD recorder, JPEG functions, DVD-Audio, mini DVD and Video CD
functions are not supported in this version.
functions are not supported in this version.
■
While recording video to DVD, please close all other programs.
■
Do not run software like a screen saver because it can put a heavy
load on the CPU.
load on the CPU.
■
Do not support mp3 decode and encode.
2. Before recording the video to DVD
■
When you record DVD disc, please use only discs recommended by
the Drive manufacturer.
the Drive manufacturer.
■
Do not set the working drive to a slow device like a USB1.1 hard
disk drive or it will fail to write DVD.
disk drive or it will fail to write DVD.
■
Do not perform any of the following actions:
■
Operate the computer for any other function, including using a
mouse or touchpad, or closing/opening the display panel.
mouse or touchpad, or closing/opening the display panel.
■
Bump or cause vibration to the computer.
■
Use the Mode control button and Audio/Video control button to
reproduce music or voice.
reproduce music or voice.
■
Open the DVD drive.
■
Install, remove or connect external devices, including such items
as a SD/SDHC memory card, PC Card/ExpressCard, Memory
Stick/Memory Stick Pro, MultiMediaCard, USB device, external
monitor, or an optical digital device.
as a SD/SDHC memory card, PC Card/ExpressCard, Memory
Stick/Memory Stick Pro, MultiMediaCard, USB device, external
monitor, or an optical digital device.
■
Please verify your disc after recording important data.
■
DVD-R/+R/+RW disc cannot be written in VR format.
■
Not support to output VCD and SVCD format.
3. About Straight to Disc
■
Not support to record on DVD-R/+R disc
■
Not support to record DVD+VR format by HDV
■
HDV support to burn DVD-Video only
■
DVD-VR format not support to add Menu
4. About recorded DVDs
■
Some DVD-ROM drives for personal computers or other DVD
players may not be able to read DVD-R/+R/-RW/-RAM discs.
players may not be able to read DVD-R/+R/-RW/-RAM discs.
■
When playing your recorded disc on your computer, please use
InterVideo WinDVD software application.
InterVideo WinDVD software application.
■
If you use an over-used rewritable disc, the full formatting might be
locked. Please use a brand new disc.
locked. Please use a brand new disc.