Toshiba 960-498 Manuale Utente

To execute the Async Test, select 

 from the DIAGNOSTIC TEST MENU, press 

 and 

follow the directions displayed on the screen. Move the highlight bar to the subtest you want 
to execute and press 

. 

Subtests 01 and 02 require the following data format: 

Method:   Asynchronous 
Speed: 

  38400BPS 

Data:   

 

8 bits and one parity bit (EVEN) 

Data pattern:  20h to 7Eh 

Subtest 01 

FIR/SIR Point to point (send) 

This subtest sends 20h through 7Eh data to the receive side, then receives the 
sent data and compares it to the original data through the FIR/SIR port. 

Subtest 02 

FIR/SIR Point to point (receive) 

This subtest is used with subtest 01 described above. This subtest receives the 
data from the send side, then sends the received data through the FIR/SIR 
port. 

Subtest 03 

Wraparound (on board) 

This subtest checks the data send/receive function through the wraparound 
connector.