Toshiba 960-498 Manuale Utente

Pagina di 365
4.13  RTC battery 
4  Replacement Procedures  
4.13 RTC 
battery 
Removing the RTC battery 
The following describes the procedure for removing the RTC battery (See Figure 4-25). 
1.  Disconnect the RTC battery harness from the connector CN8490 on the system board. 
2.  Pull out the RTC battery harness from the guide and remove the RTC battery
 
RTC battery 
RTC battery harness 
CN8490 
Guide
Figure 4-25  Removing the RTC battery  
Installing the RTC battery 
The following describes the procedure for installing the RTC battery (See Figure 4-25). 
1.  Install the RTC battery and pass the RTC battery harness through the guide
2.  Connect the RTC battery harness to the connector CN8490 on the system board. 
4-40 
 
QOSMIO F10  Maintenance Manual (960-498)