Fujitsu 6000 Manuale Utente
24
○
○
○
○
○
○
○
Memory combination table
Install a memory module to DIMM1 and DIMM2. A memory module has been installed in
DIMM1 as standard. Check the combination of memory capacity and slot using the
following table to install the memory module. Using a combination other than below may
result in faulty operation of the PC.
DIMM1 as standard. Check the combination of memory capacity and slot using the
following table to install the memory module. Using a combination other than below may
result in faulty operation of the PC.
○
○
○
○
○
○
Installing an additional memory
1
Remove the upper cover.
2
Push down the hooks at both ends of
the slot.
Use a genuine Fujitsu part called “168-pin SDRAM DIMM (100 MHZ) memory” for this PC.
The PC may not work correctly if the recommended Fujitsu memory module is not used.
The PC may not work correctly if the recommended Fujitsu memory module is not used.
Point