Gateway 9210 Manuale Utente

www.gateway.com

Click 

 to save the changes.

Click 

 to return to the SSU main window.

Boot your server from the System Companion CD, then select 

 from 

the menu. The System Setup Utility starts.

In the SSU main window, under Server Configuration, double-click 

.

Click to select the 

 check box.

In the 

 box, you can type an optional string for the community 

field in the 

 section of the SNMP trap sent for an alert. The string must be from 

5 to 16 characters. The default string is public.

In the 

 box, click either:

■

—The IP address for the server is automatically assigned by the DHCP 

(dynamic host control protocol) server on the network. The Host, Gateway, and 
Subnet Mask boxes in the dialog box are ignored.

■

—Assign the IP address for the server using the Host, Gateway, and Subnet 

Mask boxes in the dialog box.

If you chose 

 IP Setup in the previous step, complete the IP addressing boxes:

■

—The physical address of the router for this server.

■

—The IP address of this server.

■

—The IP address of the router for this server.

■

—The IP address for the server’s subnet. The server uses this to decide 

if the alert destination is on the same subnet.

In the 

 box, complete the IP address of the system you want to receive 

alerts from this server. If you want the alert to be broadcast to an entire subnet, enter 
the IP address for the subnet.

In the 

 box, complete the physical Internet address (MAC address) 

of the system you want to receive alerts from this server. Enter only valid hex values 
for the Alert IP MAC address.

Click 

, then click 

.