DELL 530b Manuale Utente
Removing and Installing Parts
155
6 Remove the two screws securing the CD/DVD drive.
7 Slide the CD/DVD drive out through the front of the computer.
8 If you are not replacing the drive, replace the drive panel insert
7 Slide the CD/DVD drive out through the front of the computer.
8 If you are not replacing the drive, replace the drive panel insert
10 Replace the bezel (see "Replacing the Bezel" on page 137).
11 Replace the computer cover (see "Replacing the Computer Cover" on
11 Replace the computer cover (see "Replacing the Computer Cover" on
12 Connect your computer and devices to electrical outlets, and then turn
them on.
13 Configure the drives in system setup (see "Entering System Setup" on
Installing a CD/DVD Drive
1 Follow the procedures in "Before You Begin" on page 105.
2 Remove the computer cover (see "Removing the Computer Cover" on
2 Remove the computer cover (see "Removing the Computer Cover" on
3 Remove the bezel (see "Removing the Bezel" on page 136).
4 Gently slide the drive into place.
5 Align the screw holes in the CD/DVD drive with the screw holes in the
4 Gently slide the drive into place.
5 Align the screw holes in the CD/DVD drive with the screw holes in the
CD/DVD drive bay.
6 Replace and tighten the two screws securing the CD/DVD drive.
7 Connect the power and data cables to the drive.
8 Connect the data cable to the system board connector on the system board.
7 Connect the power and data cables to the drive.
8 Connect the data cable to the system board connector on the system board.
book.book Page 155 Monday, October 6, 2008 11:28 AM