IBM 1483 Manuale Utente

Refer to the manual that came with your printer for the location of the DIP switches.

The 1483 supports two datastream modes for the 4019, Personal Printer Data Stream
(PPDS) mode and Hewlett-Packard (HP) Emulation mode.

In PPDS mode, the 4019 can print text and graphics from application software designed
to support IBM-compatible printers.

In HP Emulation mode, the 4019 can print text and graphics created from software based
on the Hewlett-Packard Printer Command Language (PCL) supported by HP LaserJet
Series II printers.

Refer to the documentation that came with your printer for instructions on how to set the
datastream mode.

1-1

Up (on)

USA Character set

1-2

Up (on)

USA Character set

1-3

Up (on)

USA Character set

1-4

Up (on)

Graphics table

1-5

Any

On = One direction;  Off = Two directions

1-6

Any

On = High speed draft turned off;
Off = High speed draft turned on

1-7

Any

On = Cut sheet feeder mode is on;
Off = Cut sheet feeder mode is off

1-8

Down (off)

No skip over perforation

2-1

Any

1483 overrides form length

2-2

Any

1483 overrides form length

2-3

Down (off)

Parallel interface

2-4

Down (off)

Parallel interface

2-5

Down (off)

RS-232C is not used

2-6

Down (off)

RS-232C is not used

2-7

Any

On = Short Tear-off mode is on
Off = Short Tear-off mode is off

2-8

Down (off)

CR does CR only